產品詳情
為了判斷圓錐滾子徐州INA軸承能否重復使用，**須考慮軸承的損壞程度、機械性能、工作條件、檢查周期等。檢查結果表明軸承異常損壞。找出原因，制定對策。此外，檢查結果表明，如果下面有幾個缺點，軸承就不能再使用了，需要更換*新的軸承。
In order to judge whether the tapered roller Xuzhou INA bearing can be reused, ** bearing damage, mechanical properties, working conditions, inspection cycle and so on must be considered. The inspection results show that the bearing is abnormally damaged. Find out the reasons and bulate countermeasures. In addition, the inspection results show that if there are several shortcomings below, the bearings can no longer be used and new bearings need to be replaced.
1。徐州INA軸承任何內外環或滾軸都是分開的。
1. Any inner and outer rings or rollers of Xuzhou INA bearings are separated.
2。**二。任何內外環、滾軸和保持架都有裂紋和碎片。
2. * * two. Any inner and outer rings, rollers and cages have cracks and debris.
三。保持架磨損（基本部件失效類型）嚴重或鉚釘松動嚴重。當軸承識別出軸承的真實性時，通過觸摸軸承上的鋼印，可以更快、更準確地識別軸承的真實性。如果你用手觸摸郵票，它是不可觸摸的，但你可以用釘子觸摸它。
Three. Cage wear (failure type of basic components) is serious or rivet loosening is serious. When the bearing recognizes the authenticity of the bearing, it can recognize the authenticity of the bearing more quickly and accuraby by touching the steel mark on the bearing. If you touch a stamp with your hand, it is untouchable, but you can touch it with a nail.
第四章。滾動面和滾動體上有明顯的缺口和劃痕。當徐州INA軸承識別出軸承的真實性時，通過觸摸軸承上的鋼印，可以更快、更準確地識別軸承的真實性。如果你用手觸摸郵票，它是不可觸摸的，但你可以用釘子觸摸它。
The fourth chapter. There are obvious notches and scratches on the rolling surface and the rolling body. When Xuzhou INA bearing recognizes the authenticity of the bearing, it can recognize the authenticity of the bearing more quickly and accuraby by touching the steel seal on the bearing. If you touch a stamp with your hand, it is untouchable, but you can touch it with a nail.
5。滾道和滾動件表面生銹。
5. The surface of raceway and rolling parts is rusty.
6。滾道、擋板和滾動體表面明顯堵塞。
6. The surface of raceway, baffle and rolling element is obviously blocked.
第七章。內環的內徑或外徑有蠕變。
The seventh chapter. The inner diameter or outer diameter of the inner ring has creep.
8。過熱和變色。徐州INA軸承具有額定負荷高、噪音低、大大降低維護成本、延長機器運行時間等優點。
8. Overheating and discoloration. Xuzhou INA bearing has the advantages of high rated load, low noise, greatly reducing maintenance costs and prolonging machine operation time.
軸（或桿）上的嚴重磨損（基本類型的部件故障）或劃痕是由潤滑故障或內部雜質引起的。通過觸摸軸承上的鋼印，可以更快、更準確地識別軸承。這種郵票如果你用手觸摸它就沒有接觸，但是你可以用指甲觸摸它來感受郵票的存在。徐州INA軸承應更換帶有潤滑劑（功能：減少或避免摩擦和磨損）或帶有潤滑劑的填料環，并應填充帶有潤滑劑的填料環。包裝信應仔細清洗。
Serious wear (basic type of component failure) or scratches on the shaft (or rod) are caused by lubrication failure or internal impurities. By touching the steel stamp on the bearing, the bearing can be recognized more quickly and accuraby. This kind of stamp has no contact if you touch it with your hand, but you can feel the existence of the stamp by touching it with your nails. Xuzhou INA bearings should be replaced with filling rings with lubricants (function: reduce or avoid friction and wear) or with lubricants, and should be filled with filling rings with lubricants. Packing letters should be carefully cleaned.
文章來自：徐州SKF軸承 www.wh-skf.com
Article from: Xuzhou SKF Bearing www.wh-skf.com
文章來自：徐州INA軸承 www.ina-china.cn
Article from: Xuzhou INA Bearing www.ina-China.cn
文章來自：徐州NSK軸承 www.klbbearings.com
Article from: Xuzhou NSK Bearing www.klbbearings.com
QQ：524085168
電話：0510-81207777
手機：13311666672/13395185757
