產品詳情
全自動激光影像測量?jī)xGVS4030-MFL:
|
適用制程： Applicable process |
熱彎前，熱彎后；白片、絲印后成品。 Before hot bending, after hot bending; White film, screen printing finished product. |
||||
|
功能： Features |
長、寬、孔邊距離位置、油墨尺寸、厚度、外形輪廓、平面度、熱彎邊緣點的高度、熱彎邊緣點的平面度等。 Length, b, hole edge distance b, ink size, thickness, contour, flatness, height of hot bending edge point, flatness of hot bending edge point, etc. |
||||
|
測量時間： Measuring time |
激光測量<0.25秒/點；測量完全部影像尺寸<2秒/片。 Laser measurement <0.25 seconds/point; Measure full image size <2 seconds/film. |
||||
|
應用： Applications |
適合全檢、抽檢；放在產線或?qū)嶒?yàn)室。 Suitable for full inspection and random inspection; On the production line or in the laboratory. |
||||
|
一，最大特色 One, The biggest feature |
|||||
|
同時測量高度、厚度、平面度及任意平面尺寸，可以連接機械手自動上下料。 Measure height, thickness, flatness and any plane size at the same time, can be connected to the manipulator automatic loading and unloading. |
|||||
|
二，優勢 Two, Advantages |
|||||
|
優勢1 Advantages 1 |
大視野CCD+高倍率CCD 影像+ 激光。輪廓尺寸用大視野CCD測量，表面、細節尺寸用高倍率CCD測量，Z向尺寸用激光測量。 Large field of view CCD+ high power CCD image + laser. The contour dimensions are measured with a large field of view CCD, the surface and detail dimensions are measured with a high magnification CCD, and the Z-direction dimensions are measured with a laser. |
||||
|
優勢2 Advantages 2 |
一次裝夾可以測量全尺寸；效率提高10~15倍。 One clamp can measure the full size; The efficiency is increased by 10 to 15 times. |
||||
|
優勢3 Advantages 3 |
可以快速切換測量產品的品種，無延時、無需重新編程及更換夾具。 Can quickly change the type of measurement product, no delay, no reprogramming and change of fixture. |
||||
|
優勢4 Advantages 4 |
儀器通用所有產品及所有尺寸。 Instruments are common to all products and all sizes. |
||||
|
三、儀器生產廠家及品牌介紹： Three:Introduction of instrument manufacturers and brands: |
|||||
|
儀器品牌 Brand |
生產廠家 Manufacturer |
產地 Place of origin |
銷售地點 Point of sale |
備注 Remark |
|
| T-KING |
天行 T-XING |
廣東.東莞 Dongguan, Guangdong |
東莞 Dongguan |
||
|
四、儀器硬件技術參數： Four, Instrument hardware technical beters |
|||||
|
儀器型號 Model |
GVS4030-MFL | ||||
|
測量范圍（mm) Measuring range |
X | 400 | |||
| Y | 300 | ||||
| Z | 150 | ||||
|
工作臺(mm) Workbench |
工作臺面 Work surface |
560*460 | |||
|
玻璃臺面 Glass countertop |
460*360 | ||||
|
承重 Load-bearing |
30kg | ||||
|
影像測量及測量系統 Image measurement and measurement system |
CCD |
AVT 900萬 CCD芯片 AVT 9 million CCD chips |
|||
|
1/3寸彩色高分辨率攝像機 650TV線 1/3 inch color high resolution camera 650TV cable |
|||||
|
鏡頭 Lens |
0.15X 視野115mm 0.15X Field of view 115mm |
||||
| 0.7－4.5X | |||||
|
視頻放大倍率 Video magnification |
30－225X | ||||
|
物方視場 Object field of view |
1，10.6－1.6mm； 2，75-85mm | ||||
|
工作距離 Working distance |
90mm | ||||
|
光柵尺分辨率 Grating scale resolution |
0.1um | ||||
|
線性精度(μm) Linear accuracy |
X/Y精度≤2+L/200; Z軸≤3+L/200um X/Y accuracy ≤2+L/200; Z-axis ≤3+L/200um |
||||
|
外形尺寸（mm) Overall dimension |
925*680*1070 | ||||
|
儀器重量(kg) Instrument weight |
190 | ||||
|
照明 Illumination |
LED表面光及下光源,亮度可調 LED surface light and lower light source, brightness can be adjusted |
||||
|
電源 Power source |
220V±10%(AC) 50HZ | ||||
|
五、儀器基本配置： Five, The basic configuration of the instrument: |
|||||
|
序 號 NO. |
品 名 Name |
規格/品牌 Specification/Brand |
數量 Quantity |
||
| 1 |
激光 Laser |
ORMON S7020 | 1 | ||
| 2 |
儀器機身 Instrument body |
00級山東濟南青大理石底座 Grade 00 Shandong Jinan green marble base |
1 | ||
| 3 |
工作臺 Workbench |
美國進口7075航空鋁材 The United States imports 7075 aviation aluminum |
1 | ||
| 4 |
馬達 Motor |
日本松下伺服馬達 Japan Panasonic servo motor |
3 | ||
| 5 | CCD |
AVT 900萬像素 AVT 9 million pixels |
1 | ||
|
高分辨率1/3”彩色CCD，(SONY芯片)650TV線 High resolution 1/3 "color CCD, (SONY chip)650TV cable |
1 | ||||
| 6 |
鏡頭 Lens |
遠心鏡頭 視野115mm Telecentric lens field of view 115mm |
1 | ||
|
T-KING 同軸光全自動變倍鏡頭 T-KING coaxial light automatic zoom lens |
1 | ||||
| 7 |
光柵尺 Grating scale |
德國海德漢.RSF 分辨率0.1um Heidenhain, Germany.RSF resolution 0.1um |
3 | ||
| 8 |
傳動 Drive |
進口精密線性導軌和研磨級滾珠螺桿 Imported precision linear guide rail and grinding grade ball screw |
3 | ||
| 9 |
測量軟件 Measurement software |
專業精準T-KING CNC測量軟件 | 1 | ||
| 10 |
軟件加密狗 Dongle |
T-KING定制 T-KING custom |
1 | ||
| 11 |
光學校正片 Optical correction fixture |
T-KING定制 T-KING custom |
1 | ||
| 12 |
視頻采集卡 Video capture card |
vt142 | 1 | ||
| 13 |
運動控制卡 Motion control card |
DMC3400A | 1 | ||
| 14 |
選配電腦 Optional computer |
DELL商用電腦 DELL Business Computer |
1 | ||
| 15 |
機臺工作桌 Machine work table |
一體式 Integrated |
1 | ||
| 16 |
防塵罩 Dust cover |
定制 Custom-made |
1 | ||
| 17 |
軟件使用說明書 Software instruction manual |
T-KING專用 Only for T-KING |
1 | ||
|
六、硬件特色功能介紹： Six, Hardware features: |
|||||
|
序號 NO. |
特色功能簡介 Feature and function introduction |
||||
| 1 |
智能燈光,燈光(平行底光,同軸光)大角度垂直光,環光,底角度水平光)，共分三環八區，可以變換各種角度和亮度,滿足不同產品的需求. Inbligent lighting, lighting (parallel bottom light, coaxial light) large Angle vertical light, ring light, bottom Angle horizontal light), a total of three rings and eight regions, can change a variety of angles and brightness, to meet the needs of different products. |
||||
| 2 |
光源無需開關，直接在電腦中控制光源強弱，不會有開關元器件的損耗； The light source does not need to be switched, and the strength of the light source is controlled directly in the computer, without the loss of the switching components; |
||||
| 3 |
探針預留孔：我司儀器硬件上有探針預留孔位，如需要加探針的客戶，我們可以將探針裝在儀器上，加探針后可以測量高、寬、長度、兩面的夾角、圓錐的頂角、圓柱的直徑、倒角、直線度、平面度、圓度、圓柱度、垂直度、平行度、傾斜度等。 Probe reservation hole: There is a probe reservation hole on the hardware of our instrument. If you need to add a probe, we can install the probe on the instrument. After adding the probe, you can measure the height, b, length, Angle between two sides, top Angle of the cone, diameter of the cylinder, chamfer, straightness, flatness, roundness, cylindricity, perpendicularity, parallelism, inclination, etc. |
||||
|
七、軟件基本測量功能： Seven. Basic measurement functions of the software: |
|||||
| 1 |
基本測量：點、線、圓、弧、橢圓的測量； Basic measurement: point, line, circle, arc, ellipse measurement; |
||||
| 2 |
抄數：CV曲線、曲線、二維抄數 Copy: CV curve, curve, 2D copy |
||||
| 3 |
標注：半徑標注、直徑標注、角度標注、線性標注、對齊標注：文本標注：坐標標注 Annotation: radius annotation, diameter annotation, Angle annotation, linear annotation, alignment annotation: text annotation: coordinate annotation |
||||
| 4 |
幾何測量：兩圓弧頂點距離、兩直線的距離、垂直線、平行線、剪切直線、延長直線、兩線交點、線圓交點、兩圓交點、圓的切線、兩圓切線、兩線連接弧、角平分線 Geometric measurement: vertex distance of two arcs, distance of two lines, vertical line, parallel line, shear line, extension line, intersection of two lines, intersection of lines, intersection of two circles, tangent of a circle, tangent of two circles, connecting arc of two lines, Angle bisection line |
||||
| 5 |
輔助功能：復制、全選、刪除、移動、鏡像、旋轉 Auxiliary functions: Copy, select all, delete, move, mirror, rotate |
||||
| 6 |
坐標系：設置客戶坐標系、三點設定坐標系、坐標原點平移、坐標旋轉； Coordinate system: set customer coordinate system, three-point coordinate system, coordinate origin translation, coordinate rotation; |
||||
| 7 |
形位公差：平面度、直線度、同心度、垂直度、真圓度、位置度 Form and b tolerance: flatness, straightness, concentricity, verticality, roundness, b |
||||
|
八、軟件特色功能介紹： Eight、Introduction of software features: |
|||||
| 1 |
大視圖：儀器可智能導航實物所在位置； Large view: the instrument can inbligently navigate the physical b; |
||||
| 2 |
萬能報表功能：測量數據可以發送到Excel任意位置，與任何報表都可以無縫對接，免去手工抄寫測量結果之麻煩，節省時間，避免人工輸入錯誤。 Universal report function: Measurement data can be sent to any b in Excel, and can be seamlessly connected with any report, eliminating the trouble of manual tranbion of measurement results, saving time and avoiding manual b errors. |
||||
| 3 |
夾具定位：將產品擺放在夾具內，不需要再設定基準，打開程序就可馬上測量。 Fixture bing: the product is placed in the fixture, no need to set the benchmark, open the program can be measured immediaby. |
||||
| 4 |
離線編程：打開CAD設計圖，可直接進行編程； Offline programming: Open the CAD design drawing, you can directly program; |
||||
| 5 |
SPC（統計分析軟件）：可計算CA、CP、CPK、DRL、DRR、DR、MAX、MIN、AVG、RANGE、STD； SPC (Statistical Analysis software) : CA, CP, CPK, DRL, DRR, DR, MAX, MIN, AVG, RANGE, STD; |
||||
| 6 |
拍地圖功能：可將產品圖片拍攝保存起來，拿走實物工件后，直接在照片上進行測量，測量結果與用實物測量數據一致 Taking map function: the product picture can be taken and saved, and after taking away the physical workpiece, the measurement is carried out directly on the photo, and the measurement results are consistent with the physical measurement data |
||||
| 7 |
光學測高：無需加探針即可通過光學對焦測量產品高度及孔的深度 Optical altimetry: The height of the product and the depth of the hole can be measured by optical focusing without adding a probe |
||||
| 8 |
圖像合成：可以將高度差超過鏡頭景深的產品清晰的成像到一個平面上 Image synthesis: Products whose height difference exceeds the lens depth of field can be bly imago onto a flat surface |
||||
| 9 |
亞像素自動尋邊功能：軟件采用自動尋邊，可以避免肉眼判斷帶來的誤差； Sub-pixel automatic edging function: the software adopts automatic edging, which can avoid the error caused by naked eye judgment; |
||||
| 10 |
套圖功能：打開CAD設計圖紙，可馬上查看與實際影像是否吻合，可以對外框作個初步的比對； Set of map function: open the CAD design drawing, you can immediaby see whether it is consistent with the actual image, you can make a preliminary comparison with the external frame; |
||||
| 11 |
報表格式：測量數據可以直接導入成EXCEL、CAD圖檔。 Report bat: Measurement data can be directly imported into EXCEL, CAD file. |
||||
